4-Step Installing Guide
Install your Vault Blackout Blinds hassle-free in just 5 minutes. No tools required.
What's In the Box?
-
Frame's 4 Sides
-
Weather Strip
Step 1 : Lay Out the Frame
Unpack all four frame pieces and place them on a flat, clean surface.
Display them as shown in the picture to make sure all parts are visible and ready for assembly.
Step 2 : Connect Each Corner
Connect the frame pieces at each corner, one by one, until the full frame is assembled.
Make sure every corner is fully inserted and the frame lies flat, just like in the picture.
Step 3 : Tighten the Cords
Use the clips to pull each cord toward the center until both sides feel balanced.
The goal is to create equal tension on both cords so the frame stays straight and stable.
Step 4 : Apply the Weather Strip
Peel off the yellow backing to expose the adhesive side, then press the strip firmly along all four edges.
Make sure there are no gaps so the seal stays perfectly light-blocking.
All Done!
You can now install your custom made Vault Blackout Blinds in your window and enjoy restorative nights in total darkness.